Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the frame of the previous one easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this case you'll need to source some plastic spacers to help the new pane to fit properly into the window frame.

If you are going to try to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your home until a professional is able to fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they can suffer from a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows to access the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and check for fitting. If you are happy with the size of the window, tighten the screws to hold them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window repair near me watertight and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wearing out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it comes to Upvc Window Repair window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and reduce your energy efficiency.

Make sure that the drainage holes have no debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. This can be easily fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze it could be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrow on each hinge. This shows which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also become disaligned as a result of wear, which can cause gaps between the frame and sash. If they're beyond repair, it may be required to realign them. Secondly the interlock, this is located on the hinge of the window and can also be misaligned, and again it may be feasible to give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be put on the windowsill on top. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. It is important to remember that all windows will eventually wear out and it is more cost-effective to simply replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.