Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However If you have double-pane windows that are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case you'll need to source some plastic spacers that help the new pane to fit properly into the frame of the window repairs near me.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor, where they could be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the window and the door is significant, you may want to use security screens that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window to get to the frame. With an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. The first step is to close your window and do an experiment fit. The corner joints of the sash must align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and wet floors. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer can be applied. It is essential to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze, it may be hinges that are at the fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is essentially a very simple process, but it's easier if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window improperly or due to a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear may become displaced, which will cause an opening to appear where the sash meets the frame. If they are damaged beyond repair, it might be required to realign them. In addition, the interlock could also become unbalanced. It is located on the hinge side and may need to be cleaned. In some cases it is possible to replace these.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be positioned on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert immediately.