Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this situation you'll need to locate some plastic spacers that will assist the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional arrives to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is substantial, you may want to use security screens that has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll need open the window to get to the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and perform a test fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, upvc Window Repair window leaks are caused by damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue the old caulking may require removal before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part hinges will be damaged over time. Changing a window hinge is an easy process but it can be simpler if you have someone to assist in holding the frame up.

Check that the upvc window repair hinges open and close in the proper direction. You can do this by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges can also become disaligned as a result of wear, which can cause gaps where the sash and frame meet. If they're beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it's possible to give them a good clean, but in some instances it could be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be positioned on the windowsill on top. They will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as possible.