Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't get rotten or rusty like aluminum or timber.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation you'll need find some plastic spacers that will help the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a good idea to seal the gap after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is large, you may think about the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems that include sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need to open the window to access the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you're happy with the fit, you can tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and then perform a test fit. The joints at the corners of the sash should align with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repair windows are difficult to open, or are loose and blow open with ease It could be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change the hinges on a window however it is easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us photos via our website will often solve the issue. We are happy to give suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a good way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your upvc window repairs near me window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become disaligned as a result of wear, which can cause a gap between the frame and sash. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be put on the windowsill on top. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. It is crucial to recognize that all windows have a life span and there may come an point at which it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.