Double Glazed Window Repair

It is worth looking into the warranty included with the majority of double-glazed windows. It usually covers any problems with window hardware, like hinges and locking mechanisms, in the first 10 years.

A break in the seal can be the cause of mist between your glass windows. This issue must be repaired immediately to avoid damp or mould growing within your home.

Condensation Between the Windows

If you notice condensation forming between your windows, it is an indication that the sealing in the gases that insulate the window has failed. This could be a major issue that needs to be dealt with as soon as possible, especially in winter when humidity is at its highest. It could also lead to damage to the sills, sealant, and even mildew or mould.

Double-glazed windows should not have condensation between the panes. This problem can be caused by high humidity or a very cold snap. Fortunately, it is fixable without replacing the entire window. A professional can drill small holes in the glass and spray the inside of the window with a specific cleaning solution. The moisture is then removed from the window, and an anti-fogger device may be added to prevent any further buildup of moisture in the future.

Condensation between windows can be due to air leakage, or other factors outside the window. In this scenario, it may take longer for moisture in the window to build up, as the air must be sufficiently warm to evaporate the water molecules. In these situations it might be more beneficial to replace the double-glazed windows rather than repair the seals on the existing units.

Double-glazed glass windows are comprised of two or more pieces of insulated tempered glass that are held together by a metal framework. The gap between the two of the windows is filled with a non-toxic gas for insulation like argon or Krypton and then sealed. The seal stops the insulating gases from escaping and also blocks moisture and air from entering the gap.

As windows age, seals get damaged and allow moisture to escape between the glass panes. When seals fail it is essential to notice this because it indicates that the double glazing isn't performing the way it did in the past. This could result in a decrease in energy efficiency, higher heating bills, damage to property and the risk of condensation forming between windows.

Mist

If you notice condensation on the outside of your windows, it is totally normal - it means that your double-glazed is functioning properly and retaining the heat in your home. The condensation is caused by the outside air is hotter than the glass, and it reaches the dew point of the window before the air inside. This is among the many benefits of having good quality double glazing.

If you see condensation on the inside of the window, this could be a sign of a ventilation issue within your home. This is because the extra moisture isn't going anywhere and is deposited on your window or in carpets, furniture and other areas within your home. This can be avoided by having it examined by a professional and making sure that there is plenty of fresh air in your home.

Another reason why mist appears on double-glazed windows is because the seal between two panes of glass has broken. This could be due to wear and tear or through the use of chemical cleaning solutions. The best thing to do is get the windows fixed in the shortest time possible.

Repairing your windows professionally will ensure that they are fog-free free of condensation, and free of misting. It's also cheaper than replacing the windows, and you'll save money on your energy bill.

A FENSA certified window installer can provide you with a quote for the repair or replacement of your double-glazed windows. Upgrade your old windows to energy efficient ones that are A-rated in the event that they are extremely old.

It is a good idea to retain copies of any warranties and agreements with your window installers. It will be useful if you experience any problems with your windows. You can contact your window fitters to resolve the issue. This is a better alternative to simply not addressing the issue that only make the problem worse and could lead to other issues in your home.

Close or open with difficulty

Double-glazed windows are difficult to open and close it isn't just annoying but it could also result in higher energy bills because of loss of heat and drafts. It could also be a security problem, particularly when the locks aren't operating properly. It is crucial to address any issues with double glazed doors and windows as soon as you discover them.

If you can't open your windows and have tried the simplest of fixes like using a screwdriver to prise it open or rubbing the frame with a hard object, then the problem may be more serious. It could be that the window is sagging within its frame and requires to be re-set or it could be that there is gaps between the glass panes as well as the frames. In either case you should contact a double glazing repair specialist to ensure the repairs are done properly and to avoid any further issues.

It's not common to find UPVC window handles and lock mechanisms to become stuck or unusable particularly when they're old and worn. This is usually due to an accumulation of dirt or grease in the handle. This can be easily resolved by cleaning it with a upvc window repairs cleanser. If this doesn't help, you can try gently tapping the uPVC frame using a hard object, such as an screwdriver, but be careful not to scratch the handle or the window handle mechanism.

If this does not resolve the issue, then the window may have to be replaced, as it is likely that the hinges are no more in the proper position, or the locking mechanisms are damaged. In this instance, you must consult a specialist UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or shut double glazing window. He has plenty of experience in converting older window mechanisms into modern. This can save you money by replacing the entire window. Contact us now for more information or a no-cost quote.

Warping

Double-glazed windows can be a great way to save energy in your home. They are made up of two distinct panes that have a spacer, air or dense gas between the panes. This creates an airtight seal to keep cold air out and warm air inside. However with time, the windows may be damaged or destroyed and require repair upvc window. Most of these repairs can be completed without having to replace the entire window.

Warping is a typical issue with double-glazed windows. The windows begin to bow, bend or twist, which may impact the strength of the window and its insulating capabilities. The best way to avoid this issue is to make sure that double-glazed windows are fitted properly and maintained regularly.

If your double-glazed windows are starting to warp, it is crucial to get in touch with a specialist immediately to help prevent the problem from getting worse. They will be able inspect your windows to determine the reason. They will employ special tools to fix your problem and ensure that you windows are fully sealed again.

Water vapour can trigger this issue, since it can accumulate between the windows over time. This can be caused by a variety of factors, such as the weather conditions, humidity levels and temperature variations. To address this issue, the specialist will drill a tiny hole to release moisture. The specialist will apply a cleaning agent on the glass to clean it, and then apply a sealant.

If your windows can't be shut or opened, it could be due to a damaged mechanism or hinges. It is advisable to grease these parts of the window before calling a professional as this can often solve the issue and decrease the necessity for replacements. If your windows are quite old or are not providing the insulation you would like to see, it is often better to replace them.