Repairs to upvc window repair Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this case you'll need find some plastic spacers that will help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems that include sagging. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll have to open the window repairs so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it can be caused by the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The corner joints of the sash should align with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to take action if get up each morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Check that any drainage holes have no debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease, it may be hinges at fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. Changing a window hinge is essentially a very simple procedure, but it is easier to do if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to offer assistance.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to open and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges can also be misaligned due to wear, causing an opening where the sash meets frame. If they are damaged beyond repair, it might be required to realign them. Secondly the interlock, this is located on the hinge of the window, can be misaligned. Again, it is possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals, these are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is more cost-effective to simply replace them than to repair them. If you have any problems with your upvc window it is recommended to speak with an expert immediately.